GARDNER DENVER
L22 30 HP AirStation
Product Title:
Gardner Denver L-Series L22 30 HP Rotary Screw Air Compressor AirStation – 120 Gallon Tank-Mounted with Refrigerated Dryer
Product Category:
Rotary Screw Air Compressors
Availability:
In Stock in Tempe, AZ
Product Description:
The Gardner Denver L22 AirStation combines a 30 HP lubricated rotary screw compressor, a non-cycling refrigerated air dryer, filtration, and an electric tank drain in one 120-gallon ASME receiver tank. Delivering 117 ACFM at 130 psig, this complete system requires minimal piping and labor to install.
The L22 is the natural next step for growing shops and production facilities that have outgrown a smaller unit but don’t need a full compressor room. Arizona Pneumatic stocks the L22 in Tempe, configured at 130 psig and 460V three-phase, with local, factory-trained service to support it.
- Faster, lower-cost installation with a plug-and-play package
- Clean, dry air that protects tools, equipment, and finished products
- More air in the same footprint as the 20 HP L15
- Simple, quick routine maintenance and less downtime
- In stock locally for fast delivery
- Oil-flooded, single-stage rotary screw airend with V-belt drive and automatic belt tensioning
- 120-gallon ASME receiver tank with integrated forklift slots
- Mounted non-cycling refrigerated air dryer and filter
- Electric tank drain (removes condensate automatically)
- GD Governor microprocessor controller with load/no-load control and timed shutdown
- Second pressure band for lead/lag operation with a second compressor
- TEFC main motor and mounted, wired wye-delta starter (reduced inrush current)
- Stainless steel piping and three-way dryer bypass valve
- Integrated spin-on oil filter, spin-on air/oil separator and two-stage air filter
- Quiet enclosure
- CRN- and ASME-rated aftercooler
- UL-labeled electronics
- Machine shops and metal fabrication
- Automotive repair, body, and tire shops
- Woodworking and cabinet shops
- Packaging and light assembly
- Plastics molding
- Small to mid-size manufacturing plants
| Spec | Value |
|---|---|
| Power range | 30 HP (22 kW) |
| Pressure range | 130 psig rated; 137 psig minimum working |
| Flow capacity | 117.2 ACFM at 130 psig |
| Motor design | TEFC, 1.20 service factor, 91.7% minimum efficiency; V-belt drive; wye-delta start |
| Noise level | 74 dBA |
| Weight | 1,701 lbs (with dryer) |
| Dimensions (L x W x H) | 74.8 x 35 x 76.3 in |
| Electrical - compressor | 460V / 3-phase / 60 Hz; 38 A full load current |
| Electrical - dryer | 120V / 1-phase, separate connection |
| Electrical - electric tank drain | 120V / 1-phase, separate connection |
| Package input power | 26.3 kW at 130 psig |
| Tank size | 120 gallons |
| Ambient operating range | 34–113°F |
| Lubricant | AEON 4000 |
| Discharge connection | 1 in NPT |